Sullair 02250193-593 is the replacement high efficiency oil removal coalescing element for the Sullair FXH-475 in-line compressed air filter, which removes fine oil aerosols and particles down to 0.01 micron. It is used on Sullair FXH-475 in-line compressed air filter housings. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Coalescing Line Filter Element |
| Replaces |
Sullair 02250193-593 |
| Filter grade |
H, high efficiency oil removal coalescing |
| Particle removal |
Down to 0.01 micron |
| Removes |
Fine oil aerosols, water droplets and solid particles |
| Position in the line |
After a general purpose FXF prefilter, ahead of the dryer or the point of use |
| Housing |
Sullair FXH-475 in-line filter |
| Supplied as |
Single element |
| Fits |
Sullair FXH-475 |
| Condition |
New, aftermarket |
| Stat. HS-Code |
842199 |
| Country of Manufacture |
China |
Compatibility
Sullair machines
Sullair FXH-475
Check the part number on your old unit before ordering.
Part numbers
| Sullair Part No.(SPM Part No.)
|
Fits |
|
02250193-593(SPM-ACP-3500)
|
Sullair FXH-475 |
Applications & use cases
High pressure drop across the filter
As the element loads with dirt and oil, the pressure drop rises and the compressor works harder for the same pressure at the tools. Change the element when the differential gauge reaches the red zone.
Oil or water reaching the tools
A saturated or damaged coalescing element lets liquid through to the downstream filters and the point of use. Replace it and check the drain is working.
Scheduled replacement
High efficiency coalescing elements are normally changed every 12 months or 8,000 hours, whichever comes first, or sooner if the prefilter ahead of them has been neglected.
Fitting tips
Isolate and vent the housing, check the auto drain is clear, fit the new element with a clean O ring, and check the bowl seals before pressurising.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (7 aftermarket sellers) |
USD 133.28 to 335.16 |
25 Oct 2026 |
| Compressor Parts Express |
USD 253.45 |
20 Oct 2026 |
| The Air Market |
USD 335.67 |
20 Oct 2026 |
| Air Compressor Services |
USD 354.00 |
20 Oct 2026 |
| Spare Part Mart |
USD 106.62 |
Today |
Our price of USD 106.62 is 20% to 70% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Is this a genuine Sullair part?
No. It is an aftermarket part made to fit in place of Sullair 02250193-593. It is not made by or affiliated with Sullair; the Sullair part number is used only to show what it replaces.
Will it fit my machine?
It fits Sullair FXH-475. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
Does it fit without changes?
It is made to the same mounting and connections as the original part. Fit new gaskets and seals where they are used, and check for leaks and correct operation before putting the machine back to work.