No Products in the Cart
Universal Filter Strap Wrench for Oil, Fuel a...: 
Copper Sealing Washer Assortment Kit, M5 to M...: | Element Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Impregnated Paper 10 µm |
| Media type | Impregnated Paper |
| Filtration Rating | 10 µm |
| Total Height | 265 mm (10 7/16") |
| Bypass Valve Opening Pressure | 1.75 bar (25 PSI) |
| Smallest Inner Diameter | 64.5 mm (2 17/32") |
| Outer Diameter | 130 mm (5 1/8") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | F-63-P10-M |
| Filtrec | R165C10B |
| FKI Komatsu | 848101071 |
| Lha | TIE32102 |
| Oxfil | OF.8982 |
| Sofima (UFI) | CRE160CD1 |
| Sofima (UFI) | ERA5DNCC |
| Sofima (UFI) | RE160CD1 |
| Spare Part Mart | SPM-OIL-1469 |
| UFI | ERA5DNCC |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Oxfil | USD 29.14 | 16 Oct 2026 |
| FilterFinder Online | USD 58.00 | 14 Oct 2026 |
| Hydrafil | USD 228.95 | 14 Oct 2026 |
| Spare Part Mart | USD 23.31 | Today |
Our price of USD 23.31 is 20% to 90% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Dusty and Abrasive Environments
Earthmoving and construction sites expose engines to heavy dust loads. The 10 micron impregnated paper media traps fine silicates and metal particles before they score cylinder walls or block oil galleries, extending component life and reducing unplanned downtime.
Continuous Duty Cycles
Machines running around the clock, such as in mining or power generation, demand consistent oil pressure and filtration. The high collapse strength ensures the element stays intact under sustained flow, while the bypass valve prevents oil starvation if the filter becomes restricted during extended intervals.
Preventative Maintenance Scheduling
For fleets following strict service schedules, this filter provides a cost effective way to maintain compliance. Its performance matches the original dimensions and ratings, so you can replace filters at recommended intervals without exceeding your maintenance budget.
Inventory Consolidation for Mixed Fleets
Operators running multiple brands of machinery can reduce shelf stock by using this single cross referenced filter. It replaces several branded part numbers, simplifying ordering and ensuring the correct part is always on hand for a range of equipment.
This filter is designed as a direct replacement for oil filters used in FKI Komatsu equipment. It also cross references parts from Fai Filtri, Filtrec, Lha, Oxfil, Sofima (UFI) and UFI. Always confirm the dimensions against your existing filter: total height 265 mm, outer diameter 130 mm, and smallest inner diameter 64.5 mm are the key measurements.
The filter uses impregnated paper media, which captures particles down to 10 microns. This level of filtration is critical for protecting hydraulic and engine components from fine debris that causes accelerated wear.
The filter has an outer diameter of 130 mm, a total height of 265 mm, and a smallest inner diameter of 64.5 mm. It is a spin on style element. No thread specification is listed, so please verify the gasket seat and thread size of your housing against these outer dimensions to ensure proper fit.
No, this is an aftermarket oil filter built to the original dimensions and ratings for compatibility and performance. It is not a genuine part but a direct replacement alternative that offers comparable filtration and reliability at a lower price point.
Installation follows standard spin on filter procedures. Ensure the old filter gasket is removed, lubricate the new gasket with clean oil, and hand tighten according to the manufacturer’s recommendation. No special tools are required, and you should never over tighten the canister.
We provide a 30 day money back guarantee if you are not satisfied with the product. Our price beat guarantee ensures you get the best value. All orders ship with worldwide delivery and tracking so you can monitor your shipment from dispatch to arrival.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
