Bosch 0928400804 is the fuel metering solenoid (inlet metering valve) that bolts to the high pressure pump: a silver body with two hole flange, a black coil housing with 2 pin plug and an O-ring sealed inlet. It is used on Bosch CP3 common rail pumps. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
The same part is also sold as Bosch 0928400803.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Metering Unit |
| Replaces |
Bosch 0928400803 |
| Type |
Fuel metering unit (inlet metering valve) |
| Connector |
2 pin |
| Mounting |
Two hole flange |
| Cross references |
Bosch 0928400804 |
| Fits |
Bosch CP3 common rail high pressure fuel pumps |
| Condition |
New, aftermarket |
| Stat. HS-Code |
848180 |
| Country of Manufacture |
China |
Compatibility
Bosch machines
Bosch CP3 common rail high pressure fuel pumps
Check the part number on your old unit before ordering.
Part numbers
| Bosch Part No.(SPM Part No.)
|
Fits |
|
0928400803(SPM-HEP-5355)
|
Bosch CP3 common rail high pressure fuel pumps |
|
0928400804(SPM-HEP-5355)
|
Bosch CP3 common rail high pressure fuel pumps |
Applications & use cases
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid valve or its coil is the usual suspect.
Drift or creep
A valve that does not seal lets cylinders creep. A new valve restores holding.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water first.
Fleet spares
Keep the common valves for your machines in stock to cut downtime.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| KuduParts |
USD 38.00 |
4 Nov 2026 |
| eBay, aftermarket seller |
USD 41.08 |
4 Nov 2026 |
| FridayParts |
USD 54.59 |
4 Nov 2026 |
| Spare Part Mart |
USD 29.02 |
Today |
Our price of USD 29.02 is 24% to 47% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Bosch 0928400804?
Yes, it is a direct replacement for the Bosch 0928400804 with the same fitting.
How often should I replace the Bosch 0928400804?
There is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the solenoid valve needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
How do I test a solenoid coil?
Measure the coil resistance with a multimeter and check for supply voltage at the plug with the circuit on. An open coil reads infinite.
Should I grease the connector?
A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.
Is this a genuine Bosch 0928400804?
No. It is an aftermarket solenoid valve made to replace the Bosch 0928400804. It is not made by the original manufacturer; the number only shows what it replaces.