Hydac 0280D005BH4HC, direct aftermarket replacement. Hydac 0280D005BH4HC is a hydraulic filter element, 68 mm (2.68 in) across and 355 mm (13.98 in) high. The same element is listed under 18 other numbers from Airfil, Behringer, Epe, Fai Filtri, Finn Filter and others, all in the cross reference table below.
The element takes wear particles and dirt out of the hydraulic oil, which protects pumps, valves and cylinders from wear and sticking. Every element is checked against the part number before it ships, and every order is covered by our
30 day money back guarantee, worldwide delivery and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Hydraulic Filter Element |
| Replaces |
Hydac 0280D005BH4HC |
| Outside Diameter |
68 mm (2.68 in) |
| Height |
355 mm (13.98 in) |
| Media |
Pleated filter media |
| Stat. HS-Code |
842129 |
| Country of Manufacture |
China |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (5 aftermarket sellers) |
USD 39.48 to 321.97 |
25 Oct 2026 |
| SONA Filtration |
USD 133.99 |
20 Oct 2026 |
| Filtration Point |
USD 138.06 |
20 Oct 2026 |
| Cardinal Filters |
USD 183.80 |
20 Oct 2026 |
| Oxfil |
USD 193.90 |
20 Oct 2026 |
| FilterFinder Online |
USD 266.00 |
20 Oct 2026 |
| Hydrafil |
USD 301.95 |
20 Oct 2026 |
| Spare Part Mart |
USD 31.58 |
Today |
Our price of USD 31.58 is 20% to 90% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Scheduled service
Change the element when the clogging indicator shows it is loaded, or at the hours in the machine's service plan, whichever comes first.
Breakdown spares
Keep one on the shelf so a loaded hydraulic filter element does not stop the machine while parts are ordered.
Workshop and fleet stock
Workshops looking after several machines can stock this one element under any of its 19 part numbers.
Frequently asked questions
Is this a genuine Hydac 0280D005BH4HC?
No. It is an aftermarket hydraulic filter element made to replace the Hydac 0280D005BH4HC. It is not made by or affiliated with Hydac, and the part number is used only to show what it replaces.
Will it fit my machine?
It replaces the element numbered Hydac 0280D005BH4HC and the other numbers in the cross reference table. Check the number on the old element or in the machine's parts list, or measure it: this one is 68 mm (2.68 in) across and 355 mm (13.98 in) high.
When should I change the element?
Change the element when the clogging indicator shows it is loaded, or at the hours in the machine's service plan, whichever comes first.
How do I fit it?
Stop the machine and let the pressure out of the circuit. Open the filter housing, take out the old element and clean the bowl. Fit the new element with its new O rings lightly oiled, close the housing to the maker's torque, then run the machine and check for leaks.