No Products in the Cart
| Part Type | Compressed air filter element |
| Replaces | Pneumatech P-280-25 |
| Element Size | 280-25 |
| Grade | grade P (particulate interceptor, 3 micron) |
| Filtration | Solid particles down to 3 micron, high dirt holding capacity |
| Outside Diameter | 82 mm (3.22 in) |
| Overall Length | 712 mm (28.03 in) |
| Stat. HS-Code | 842139 |
| Brand | Code |
|---|---|
| Pneumatech | P-280-25 |
| Spare Part Mart | SPM-INF-2967 |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Filter Element Store | USD 97.96 | 6 Oct 2026 |
| eIndustrial Solutions | USD 118.00 | 6 Oct 2026 |
| eBay (4 aftermarket sellers) | USD 118.30 to 179.96 | 6 Oct 2026 |
| Moisture Boss | USD 156.49 | 6 Oct 2026 |
| Spare Part Mart | USD 78.37 | Today |
Our price of USD 78.37 is 20% to 56% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Annual element change
Change the element at least once a year (about 8,000 running hours), or sooner if the differential pressure gauge on the filter shows the element is loaded.
Protecting the coalescer
The P element takes the bulk of the pipe scale, rust and dirt out of the air, so the 0.01 micron C element after it lasts its full life.
Workshop and plant air
Line filters sit after the compressor, receiver or dryer to keep water, oil and dirt out of air tools, valves and cylinders.
No. It is an aftermarket compressed air filter element made to replace the Pneumatech P-280-25. It is not made by or affiliated with Pneumatech, and the part number is used only to show what it replaces.
It replaces the element numbered P-280-25. Check the number printed on the old element, or measure it: this one is 3.22 in (82 mm) outside diameter and 28.03 in (712 mm) long. The first letter is the grade (C coalescing, P particulate) and the numbers are the size.
Change the element at least once a year (about 8,000 running hours), or sooner if the differential pressure gauge on the filter shows the element is loaded.
The P element is a 3 micron particulate interceptor that holds a lot of dirt. The C element is a 0.01 micron coalescer that removes oil and water aerosols. Where both are fitted, the P element goes first so the C element is not blocked by solid dirt.
Change the other elements in the same line at the same service, fit new O-rings if the old ones are flattened or cracked, and check that the drain on the filter bowl works.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
