SMC AM-EL350, direct aftermarket replacement. Aftermarket replacement for the SMC AM-EL350 mist separator element. It fits SMC AM350C units (and the earlier AM350 without the C suffix) and is made to the same size, so it fits the bowl in place of the original.
The AM mist separator takes out oil mist and fine particles down to 0.3 µm. It is the usual stage after a main line filter and before a micro mist separator, and it protects valves and cylinders from compressor oil carry over. Sold as a single element, shipped worldwide, and covered by our
30 day money back guarantee and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Compressed air mist separator element |
| Replaces |
SMC AM-EL350 |
| Fits |
SMC AM350C |
| Filtration Rating |
0.3 µm |
| Filter Media |
Fibre element between steel end caps |
| Medium |
Compressed air |
| Stat. HS-Code |
842199 |
| Country of Manufacture |
China |
Compatible equipment
SMC
AM350C units (and the earlier AM350 without the C suffix)
Cross references
| Brand |
Code |
| SMC |
AM-EL350 |
| Spare Part Mart |
SPM-INF-3741 |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (3 aftermarket sellers) |
USD 23.31 to 110.99 |
25 Oct 2026 |
| FridayParts |
USD 41.99 |
21 Oct 2026 |
| Moisture Boss |
USD 123.13 |
21 Oct 2026 |
| Spare Part Mart |
USD 18.65 |
Today |
Our price of USD 18.65 is 20% to 85% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Oil mist removal
The AM catches the oil aerosol a compressor sends down the line, so valves, cylinders and tools stay clean.
Pre-filter for micro mist separators
Fitted ahead of an AMD 0.01 µm separator, it takes the bulk of the oil so the finer element lasts longer.
General plant air
Blow off, air tools and pneumatic machinery that do not need 0.01 µm air are well served by a 0.3 µm mist separator.
Planned maintenance
Change the element when the pressure drop reaches 0.1 MPa or every two years, whichever comes first.
Frequently asked questions
Is this a genuine SMC part?
No. It is an aftermarket element made to fit. It is not made by or affiliated with SMC; the SMC number AM-EL350 is shown only so you can match the part you are replacing.
How do I know it fits?
Check the model on the unit's body. This element fits SMC AM350C units (and the earlier AM350 without the C suffix). If the old element is marked AM-EL350, this is the replacement.
What else should I check at a change?
Check the bowl O-ring when you change the element and replace it if it is flattened or cracked, and make sure the auto drain is clear.