SMC AMD-EL850, direct aftermarket replacement. Aftermarket replacement for the SMC AMD-EL850 micro mist separator element. It fits SMC AMD850 units and is made to the same size, so it fits the bowl in place of the original.
The AMD micro mist separator takes out oil aerosol and fine particles down to 0.01 µm. It is the usual stage before precision valves, instruments and air that touches product. Sold as a single element, shipped worldwide, and covered by our
30 day money back guarantee and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Compressed air micro mist separator element |
| Replaces |
SMC AMD-EL850 |
| Fits |
SMC AMD850 |
| Filtration Rating |
0.01 µm |
| Filter Media |
Fibre element with foam outer sleeve |
| Medium |
Compressed air |
| Stat. HS-Code |
842199 |
| Country of Manufacture |
China |
Cross references
| Brand |
Code |
| SMC |
AMD-EL850 |
| Spare Part Mart |
SPM-INF-3749 |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| FridayParts |
USD 41.99 |
21 Oct 2026 |
| eBay (6 aftermarket sellers) |
USD 85.90 to 123.80 |
25 Oct 2026 |
| Moisture Boss |
USD 676.64 |
21 Oct 2026 |
| Spare Part Mart |
USD 33.59 |
Today |
Our price of USD 33.59 is 20% to 95% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Instrument and control air
Micro filtered air keeps proportional valves, air bearings and sensors free of oil films and fine dirt.
Coating and painting lines
Oil aerosol in spray air causes fisheyes and poor adhesion. A fresh 0.01 µm element is the usual fix.
Pre-filter for carbon
An AMF odour removal filter or carbon stage must sit after a 0.01 µm separator like this one.
Planned maintenance
Change the element when the pressure drop reaches 0.1 MPa or every two years, whichever comes first.
Frequently asked questions
Is this a genuine SMC part?
No. It is an aftermarket element made to fit. It is not made by or affiliated with SMC; the SMC number AMD-EL850 is shown only so you can match the part you are replacing.
How do I know it fits?
Check the model on the unit's body. This element fits SMC AMD850 units. If the old element is marked AMD-EL850, this is the replacement.
What else should I check at a change?
Check the bowl O-ring when you change the element and replace it if it is flattened or cracked, and make sure the auto drain is clear.