SMC AME-EL350, direct aftermarket replacement. Aftermarket replacement for the SMC AME-EL350 super mist separator element. It fits SMC AME350C units (and the earlier AME350 without the C suffix) and is made to the same size, so it fits the bowl in place of the original.
The AME super mist separator takes out fine oil aerosol and particles down to 0.01 µm. It is used where the air must be close to oil free: coating lines, clean rooms and equipment that cannot tolerate oil. Sold as a single element, shipped worldwide, and covered by our
30 day money back guarantee and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Compressed air super mist separator element |
| Replaces |
SMC AME-EL350 |
| Fits |
SMC AME350C |
| Filtration Rating |
0.01 µm |
| Filter Media |
Fibre element in a steel support cage |
| Medium |
Compressed air |
| Stat. HS-Code |
842199 |
| Country of Manufacture |
China |
Compatible equipment
SMC
AME350C units (and the earlier AME350 without the C suffix)
Cross references
| Brand |
Code |
| SMC |
AME-EL350 |
| Spare Part Mart |
SPM-INF-3753 |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (6 aftermarket sellers) |
USD 27.78 to 54.18 |
25 Oct 2026 |
| FridayParts |
USD 41.99 |
21 Oct 2026 |
| Moisture Boss |
USD 190.45 |
21 Oct 2026 |
| Spare Part Mart |
USD 22.22 |
Today |
Our price of USD 22.22 is 20% to 88% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Coating and painting lines
Oil free spray air prevents fisheyes and adhesion faults on painted and coated parts.
Clean rooms and electronics
Super mist separated air is the usual spec for blow off and actuators inside clean areas.
Oil sensitive equipment
Air bearings, precision instruments and food contact air use a 0.01 µm stage.
Planned maintenance
Change the element when the pressure drop reaches 0.1 MPa or every two years, whichever comes first.
Frequently asked questions
Is this a genuine SMC part?
No. It is an aftermarket element made to fit. It is not made by or affiliated with SMC; the SMC number AME-EL350 is shown only so you can match the part you are replacing.
How do I know it fits?
Check the model on the unit's body. This element fits SMC AME350C units (and the earlier AME350 without the C suffix). If the old element is marked AME-EL350, this is the replacement.
What else should I check at a change?
Check the bowl O-ring when you change the element and replace it if it is flattened or cracked, and make sure the auto drain is clear.