No Products in the Cart
Miller 192053 (also listed as 177887) is the drag shield for the Miller ICE-40C, ICE-40T, ICE-50C and ICE-55C air plasma torches, used on the Spectrum 625, 625 X-TREME, 701 and 2050 plasma cutters. This is an aftermarket part made to the same number and fit.
It replaces Miller 192053 and Miller 177887.
The drag shield screws over the tip at the front of the retaining cup. Its notched face lets you rest the torch on the plate and drag it along a line while the tip stays at the right height, and it keeps spatter off the tip when piercing.
Check the number on your old part or in the torch manual before ordering: it should read 192053. Sold in packs of 2 or 5.
| Part number | 192053, 177887 |
| Part | Plasma drag shield |
| Current | 40 to 55 A |
| Fits | Miller ICE-40C, ICE-40T, ICE-50C and ICE-55C hand and machine torches |
| Material | Copper |
| Weight | About 15 g each |
| Type | Aftermarket replacement |
| Pack Options | 2 pack, 5 pack |
| Stat. HS-Code | 851590 |
| Country of Manufacture | China |
| Trademarks | Miller, ICE and Spectrum are trademarks of their owners. Names and part numbers are for reference only; this is an aftermarket part, not made or approved by them. |
Miller ICE plasma torches
Match the part number on your old part before ordering. The XT30, XT40 and XT60 torches use different parts.
| Pack | Dimensions | Miller Part No.(SPM Part No.) |
|---|---|---|
| Miller 192053 | drag shield | 192053(SPM-PLA-5008) |
| Miller 192053 | drag shield | 177887(SPM-PLA-5008) |
Drag cutting
With the drag shield fitted you can rest the torch on the plate and follow a line or template by hand. Replace it when the face is worn, burned or out of round.
Protecting the tip
The shield keeps spatter and molten metal off the tip, especially when piercing. A shield clogged with spatter should be replaced.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (5 aftermarket sellers) (pack of 2) | USD 12.04 to 12.98 | 1 Nov 2026 |
| FridayParts (2 singles) | USD 35.68 | 1 Nov 2026 |
| WeldingDirect (pack of 2) | USD 47.00 | 2 Nov 2026 |
| Arc-Zone (Profax) (2 singles) | USD 54.00 | 5 Nov 2026 |
| Spare Part Mart (pack of 2) | USD 9.56 | Today |
Our price of USD 9.56 is 21% to 82% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Miller ICE-40C, and 3 more listed under compatible equipment. Check the old plasma shield is marked the original part or one of the cross references, because makers change parts between serial ranges.
On the Miller ICE-40C, laser and plasma nozzles wear in days to weeks, depending on hours of arc or beam time, material and gas. Change it on condition, not by date.
An oval or nicked orifice, spatter stuck on the tip, more dross, a wider cut or bevel on one side, and height sensing errors.
Centre the nozzle on the beam and recalibrate the height sensor. A new nozzle off centre cuts on one side only.
Look at the orifice: if it is oval, nicked or has spatter stuck to it, the cut quality falls. Change it before it damages the parts behind it.
No. It is an aftermarket plasma shield made to replace the the original part. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
