Kaeser 6.3672.0 is the air/oil separator element used on Kaeser SK rotary screw compressors (SK 15, SK 20). This aftermarket air/oil separator element is 128 mm (5.04 in) across the flange, 100 mm across the body, 40 mm inside and 170 mm (6.69 in) high.
The separator strips the fine oil mist out of the compressed air leaving the oil tank, so the oil stays in the compressor and the air going to the line is clean. Every element is checked against the part number before it ships, and every order is covered by our
30 day money back guarantee, worldwide delivery and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Compressor air/oil separator element |
| Replaces |
Kaeser 6.3672.0 |
| Fits |
Kaeser SK 15, Kaeser SK 20 |
| Flange Diameter |
128 mm (5.04 in) |
| Body Diameter |
100 mm (3 15/16") |
| Inside Diameter |
40 mm (1 9/16") |
| Height |
170 mm (6.69 in) |
| Design |
Flanged drop-in element with gaskets |
| Stat. HS-Code |
842139 |
| Country of Manufacture |
China |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (10 aftermarket sellers) |
USD 84.12 to 102.00 |
9 Oct 2026 |
| FilterFinder Online |
USD 126.00 |
9 Oct 2026 |
| MoistureBoss |
USD 188.93 |
9 Oct 2026 |
| Air Compressor Services |
USD 280.00 |
9 Oct 2026 |
| Spare Part Mart |
USD 67.30 |
Today |
Our price of USD 67.30 is 20% to 76% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Scheduled compressor service
Change the separator at the interval on the compressor's maintenance schedule (on most Kaeser screw compressors every 3,000 to 6,000 running hours, or every two years), and sooner if oil carry-over rises or the separator pressure drop gets high.
Breakdown spares
Keep one on the shelf so a blocked air/oil separator element does not leave a Kaeser compressor standing while parts are ordered.
Workshop and fleet stock
Hire fleets and workshops servicing several Kaeser compressors can stock the element by its part number.
Frequently asked questions
Is this a genuine Kaeser 6.3672.0?
No. It is an aftermarket air/oil separator element made to replace the Kaeser 6.3672.0. It is not made by or affiliated with Kaeser, and the part number is used only to show what it replaces.
Will it fit my compressor?
It replaces the element numbered 6.3672.0 (also written 636720) on Kaeser SK rotary screw compressors. Check the number on the old element or in the compressor's parts list, or measure it: this one is 128 mm (5.04 in) across the flange, 100 mm across the body, 40 mm inside and 170 mm (6.69 in) high.
When should I change the separator?
Change the separator at the interval on the compressor's maintenance schedule (on most Kaeser screw compressors every 3,000 to 6,000 running hours, or every two years), and sooner if oil carry-over rises or the separator pressure drop gets high.
How do I fit it?
Stop the compressor and let all the pressure out of the oil tank. Take the cover off the separator tank, lift out the old element and clean both sealing faces. Fit the new element with new gaskets, keep the earthing staple in place against the gasket, refit the cover and tighten the bolts evenly in a cross pattern. Run the compressor and check for leaks.