Wilkerson FRP-95-209, direct aftermarket replacement. Aftermarket replacement element for the Wilkerson FRP-95-209, the 5 micron general purpose particulate element for the F30 general purpose filter. It also replaces HiFi SI 49001.
This is the general purpose particulate element that stops pipe scale, rust and dirt down to 5 micron. It is supplied with the bowl O-ring. Every element is checked against the part number before it ships, and every order is covered by our
30 day money back guarantee, worldwide delivery and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Compressed air filter element |
| Replaces |
Wilkerson FRP-95-209 |
| Also Replaces |
HiFi SI 49001 |
| Grade |
General purpose type "A" particulate, 5 micron |
| Fits |
F30 general purpose filter |
| Flow Direction |
Outside to inside |
| Media |
Sintered polyethylene |
| Country of Manufacture |
China |
| Stat. HS-Code |
842139 |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eIndustrial Solutions |
USD 27.00 |
22 Oct 2026 |
| Compressor Now |
USD 50.22 |
22 Oct 2026 |
| The Air Market |
USD 51.45 |
22 Oct 2026 |
| Air Compressor Services |
USD 65.50 |
22 Oct 2026 |
| eBay, aftermarket seller |
USD 111.80 |
25 Oct 2026 |
| Spare Part Mart |
USD 24.95 |
Today |
Our price of USD 24.95 is 8% to 78% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Scheduled element change
Change particulate and coalescing elements at least once a year, or sooner when the pressure drop across the filter reaches about 0.7 bar (10 psi). Change activated carbon elements at least every 6 months, or when oil odour returns downstream.
Pre-filter and after-filter
A 5 micron particulate element protects a coalescing filter from bulk dirt, or catches desiccant dust after a dryer.
Workshop and plant air
Line filters sit after the compressor, receiver or dryer to keep water, oil and dirt out of the air system.
Frequently asked questions
Is this a genuine Wilkerson FRP-95-209?
No. It is an aftermarket compressed air filter element made to replace the Wilkerson FRP-95-209. It is not made by or affiliated with Wilkerson or Dixon, and the part number is used only to show what it replaces.
Will it fit my filter?
It replaces the element marked FRP-95-209, used in the F30 general purpose filter. Check the number printed on the old element or on the filter body label before ordering.
When should I change the element?
Change particulate and coalescing elements at least once a year, or sooner when the pressure drop across the filter reaches about 0.7 bar (10 psi). Change activated carbon elements at least every 6 months, or when oil odour returns downstream.
Which element do I need?
Use the same part number as the element you are taking out. A typical line runs a 5 micron particulate filter, then a 0.01 micron coalescing filter, then an activated carbon adsorber where oil vapour and odour must be removed.
Should I change anything else at the same time?
Fit a new bowl O-ring if the old one is flattened or cracked, check that the bowl drain works, and change the other elements in the same line at the same service.