Pall HC9600FDT16H, direct aftermarket replacement. Aftermarket replacement element for the Pall HC9600FDT16H: a pleated glass fibre element with nitrile seals for Pall filters that take the HC9600FDT16H. It measures 78.7 mm outside diameter, 43.8 mm bore and 426.5 mm long, with flow from outside to inside.
This grade suits return lines, lubrication circuits and general pump protection. Sold as a single element, shipped worldwide, and covered by our
30 day money back guarantee and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Hydraulic filter element |
| Replaces |
Pall HC9600FDT16H |
| Filtration Media |
Pleated glass fibre (microglass) |
| Filtration Rating |
Beta 1000 (ISO 16889) |
| Flow Direction |
Out-In |
| Seal Material |
Nitrile (NBR / Buna-N) |
| Largest Outer Diameter |
78.7 mm (3 3/32") |
| Largest Inner Diameter |
43.8 mm (1 23/32") |
| Total Height |
426.5 mm (16 13/16") |
| Construction |
corrosion resistant steel end caps, single open end |
| Collapse Rating |
290 psid |
| Stat. HS-Code |
842129 |
| Country of Manufacture |
China |
Compatible equipment
Pall
Filters taking the HC9600FDT16H element
Measure the old element
OD 78.7 mmBore 43.8 mmLength 426.5 mm
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| Filtration Point |
USD 54.33 |
31 Oct 2026 |
| Cardinal Filters |
USD 76.64 |
31 Oct 2026 |
| FilterFinder Online |
USD 87.00 |
31 Oct 2026 |
| eBay (2 aftermarket sellers) |
USD 109.24 to 122.97 |
31 Oct 2026 |
| Hydrafil |
USD 197.95 |
31 Oct 2026 |
| Spare Part Mart |
USD 43.46 |
Today |
Our price of USD 43.46 is 20% to 78% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases and applications
What it does
It cleans the oil in a hydraulic circuit, catching the wear particles that would otherwise score pumps, valves and cylinders.
Where it is used
Mobile machines such as excavators, loaders and cranes, and industrial hydraulic power units, on Pall equipment and others that take the same element.
Frequently asked questions
Will it replace my Pall HC9600FDT16H?
Yes, it is a direct replacement for the Pall HC9600FDT16H with the same fitting. If the number is worn off, it measures 78.7 mm (3 3/32") across and 426.5 mm (16 13/16") high.
How often should I replace the Pall HC9600FDT16H?
Usually every 500 to 1,000 hours, as in the machine service schedule. The first change on a new or rebuilt machine comes much earlier, often at about 250 hours, to catch the run in debris.
What are the signs the element needs replacing?
The clogging indicator trips, the hydraulics feel slow or noisy when cold, or an oil sample shows high particle counts. Change it after any pump or motor failure as well.
What does the beta ratio mean?
It is how many particles of the rated size go in for every one that gets through. A beta of 200 at Beta 1000 (ISO 16889) means 99.5% of particles at that size are caught.
Can it be cleaned and reused?
No. Glass fibre and cellulose media cannot be cleaned without damage. Only wire mesh strainers are meant to be washed.
Is this a genuine Pall HC9600FDT16H?
No. It is an aftermarket element made to replace the Pall HC9600FDT16H. It is not made by the original manufacturer; the number only shows what it replaces.