No Products in the Cart
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | Out-In |
| Total Height | 160 mm (6 5/16") |
| Largest Inner Diameter | 40.5 mm (1 19/32") |
| Largest Outer Diameter | 78 mm (3 1/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Epe | 20160H10SLB000P |
| Epe | 20160H10XLB000P |
| Fai Filtri | CF-DN-0160-A10-HA |
| Fleetguard | ST2199 |
| Hydac | 0160DN010BH |
| Hydac | 0160DN010BH3HC |
| Hydac | 0160DN010BH4HC |
| Hydac | 0160DN010BHHC |
| Hydac | 1268873 |
| Mahle | AF120176010 |
| Mahle | PI73016DNSMXVST10 |
| Oxfil | HF.8344 |
| Parker Parfit | FDBE1A10QH |
| Parker Parfit | GO4103 |
| Parker Parfit | PR4533 |
| Rexroth | R901025386 |
| Sofrance | C2021D0Y1A |
| Spare Part Mart | SPM-HYD-1424 |
| Stauff | NL160F10B |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Oxfil | USD 106.48 | 16 Oct 2026 |
| Spare Part Mart | USD 82.72 | Today |
Our price of USD 82.72 is approximately 22% less than this seller.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Continuous Heavy-Duty Operation
Hydraulic systems running under constant load are prone to accelerated wear from circulating particles. The 12 micron microfibre media captures fine debris that would otherwise damage servo-valves and cylinder seals, extending component life in non-stop production environments.
Consolidating Fleet Maintenance
If your workshop services equipment from multiple Hydac-aligned manufacturers, keeping a single part number that crosses over to Epe, Mahle, Stauff and others cuts inventory complexity. One filter stock covers more machines, reducing shelf space and administrative overhead.
Dusty or Outdoor Worksites
Earthmoving, quarrying and agricultural equipment ingests airborne dust that rapidly loads filters. The inorganic microfibre media holds more contaminant without restricting flow, helping maintain oil cleanliness between scheduled servicing even in gritty conditions.
Sensitive Component Protection
When hydraulic circuits include precision proportional valves or tight-clearance piston pumps, even low levels of silt cause malfunction. Installing a 12 micron absolute filter ensures the oil meets the cleanliness standards these components demand, preventing unexpected downtime.
This filter is a direct replacement for part numbers from Epe, Fai Filtri, Fleetguard-ST, Hydac, Mahle, Oxfil, Parker Parfit, Rexroth, Sofrance and Stauff. If your current filter cross-references to one of those brands it will fit. Physically the element measures 160 mm tall with a largest outer diameter of 78 mm and largest inner diameter of 40.5 mm; compare these to your existing element to confirm.
The element is rated at 12 microns absolute, meaning it stops 99.9% of particles at that size. It uses inorganic microfibre media, which resists moisture and chemical degradation better than cellulose alternatives, and is suited to the out-in flow direction indicated on the filter.
The filter has a total height of 160 mm, largest outer diameter of 78 mm and largest inner diameter of 40.5 mm. Thread details are not specified for this element, so please verify the sealing and mounting interface against your housing before ordering. The dimensions match the OEM element for Hydac equipment where the cross-reference applies.
This filter is built to the original dimensions and ratings, delivering the same 12 micron absolute performance and physical fit. You get equal protection for your hydraulic system at a fraction of the cost, without sacrificing quality. Every filter is backed by our 30-day money-back guarantee.
Installation follows normal hydraulic filter replacement steps. Depressurise the system, remove the old element, clean the housing, and seat the new filter correctly. Ensure the out-in flow direction is observed. Always replace the housing O-ring or seal if one is provided, and check for leaks after recommissioning.
Spare Part Mart ships worldwide with full tracking on every order. We offer a 30-day money-back guarantee if you are not satisfied, and our price-beat guarantee ensures you get the best deal. There are no hidden fees, and our support team is ready to help with any after-sales queries.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.


