No Products in the Cart
Nitrile (NBR) O-Ring Assortment Kit, Metric, ...: 
Universal Filter Strap Wrench for Oil, Fuel a...: | Element Collapse pressure | 25 bar (363 PSI) |
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Flow direction | Out-In |
| Body Height | 193 mm (7 19/32") |
| Total Height | 199 mm (7 27/32") |
| Largest Inner Diameter | 48.4 mm (1 29/32") |
| Smallest Inner Diameter | 30 mm (1 3/16") |
| Largest Outer Diameter | 94 mm (3 11/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Airfil | AFKOVL986 |
| Baldwin | PT8992MPG |
| Donaldson | 40551 |
| Donaldson | P173040 |
| Fai Filtri | CHP-372-A06-NA |
| Fairey Arlon | 370L201A |
| Fairey Arlon | 370L221A |
| Fairey Arlon | 370Z221A |
| Hycon | H370Z2005BN |
| Hydac | 60308D05BN |
| Oxfil | HF.8547 |
| Spare Part Mart | SPM-HYD-1503 |
| ST Separat Tech | 3F37GGEB08 |
| ST Separat Tech | F370A062 |
| Stauff | SA085E05B |
| Vickers | V0372B2C05 |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Oxfil | USD 45.95 | 16 Oct 2026 |
| FilterFinder Online | USD 50.00 | 12 Oct 2026 |
| Filtration Point | USD 76.17 | 12 Oct 2026 |
| Cardinal Filters | USD 77.69 | 12 Oct 2026 |
| Hydrafil | USD 145.95 | 12 Oct 2026 |
| Spare Part Mart | USD 36.76 | Today |
Our price of USD 36.76 is 20% to 75% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Dusty and Abrasive Environments
In mining, quarrying, or construction settings where airborne grit constantly challenges oil cleanliness, the 7 µm microfibre media provides a reliable defence. Fine particle hold-up is consistent, reducing the risk of scoring and wear inside hydraulic pumps and actuators. This protection extends major component life even when ambient conditions are far from ideal.
Continuous-Duty Industrial Machinery
When hydraulic systems run around the clock, filter bypass must be avoided at all costs. The robust element construction holds its form under high flow rates and sudden pressure spikes, maintaining a steady filtration barrier. Uninterrupted service means fewer unplanned stoppages and consistent output from conveyor drives, injection moulding presses, or power units.
Scheduled Preventative Maintenance
A quick filter swap is essential during tight service windows. With a total height of 199 mm and body diameter of 94 mm, this element drops into the housing without fumbling or forcing. Confident fitment reduces mechanic time, lowers the risk of housing damage, and gets machinery back on line faster.
Fleet-Wide Inventory Consolidation
Keeping separate branded elements for every machine ties up capital and shelf space. The extensive cross-reference compatibility lets a single part number replace multiple brands, including Airfil, Baldwin, Donaldson, and Hydac. Standardising on this filter simplifies stores management and reduces the chance of running out of a critical spare.
This element is a direct replacement for filters used in Hydac equipment and any system accepting these dimensions. Check your existing element against a body height of 193 mm, an outer diameter of 94 mm, largest inner diameter of 48.4 mm, and smallest inner diameter of 30 mm. It also cross-references with part numbers from Airfil, Baldwin, Donaldson, Fai Filtri, Fairey Arlon, Hycon, Hydac, Oxfil, ST Separat Tech, Stauff, and Vickers.
This filter uses inorganic microfibres to deliver a consistent particle removal rating of 7 µm. This fine media traps solid contaminants that cause abrasive wear in pumps and valves, helping maintain the recommended oil cleanliness levels for modern hydraulic systems.
The cartridge measures 199 mm in total height with a 193 mm body height, and an outer diameter of 94 mm. It has a stepped inner bore: 48.4 mm at the larger opening and 30 mm at the smaller end. There are no threads on the element itself; it is a slip-in cartridge located by inner spigots. Always compare these measurements to your current element.
While it carries no OEM badge, this filter is built to match the filtration performance and structural demands of the original. Its inorganic microfibre media meets a 7 µm rating, and the element is rated to a collapse pressure of 25 bar, so it stays intact under demanding hydraulic circuit conditions. You receive dependable protection without the inflated brand price.
Always relieve system pressure and shut down the machine first. Remove the filter housing cover, extract the old element, and clean any settled debris from the bowl. Slide the new this filter into place, ensuring the inner diameters locate correctly on the housing spigots. Refit the cover, check for leaks once the system is repressurised, and resume normal operation. Follow your equipment manual for any specific steps.
We provide worldwide shipping with full tracking, so you can order wherever you are located. Every filter comes with a 30-day money-back guarantee for complete peace of mind, and our price-beat guarantee ensures you receive the best available deal. If you find the same specification offered elsewhere at a lower price, we will beat it.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
