No Products in the Cart
Nitrile (NBR) O-Ring Assortment Kit, Metric, ...: 
Universal Filter Strap Wrench for Oil, Fuel a...: | Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Inorganic Microfibers 12 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 12 µm |
| Flow direction | Out-In |
| Total Height | 161 mm (6 11/32") |
| Smallest Inner Diameter | 32.2 mm (1 9/32") |
| Outer Diameter | 58 mm (2 9/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Bosch | R928005855 |
| Comex | N0063RN10 |
| Comex | N0063RN2010 |
| Epe | 10063H10SLA000P |
| Fai Filtri | CF-RN-0063-A10-NA |
| Fleetguard | ST1969 |
| Hydac | 00063RN006BN3HC |
| Hydac | 00063RN006BN4HC |
| Hydac | 00063RN006BNHC |
| Hydac | 1268856 |
| Internormen | 01NR6310VG10BP |
| Internormen | 313876 |
| Internormen | 314218 |
| Mahle | PI23006RNSMX10 |
| Netstal | 9678150510 |
| Oxfil | HF.8412 |
| Pall | HC0251FKS6H |
| Rexroth | ABZFER0063101XMD |
| Rexroth | R901025291 |
| Rexroth | R928005855 |
| Sofrance | C1012D0Y0A |
| Spare Part Mart | SPM-HYD-1449 |
| Stauff | NR063E10B |
| UFI | ERB31NFC |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Oxfil | USD 40.35 | 16 Oct 2026 |
| Cardinal Filters | USD 59.83 | 12 Oct 2026 |
| Hydrafil | USD 98.95 | 12 Oct 2026 |
| Filtration Point | USD 193.21 | 12 Oct 2026 |
| Spare Part Mart | USD 32.28 | Today |
Our price of USD 32.28 is 20% to 83% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-Pressure Hydraulic Systems
In presses, injection moulding machines, and other high-pressure circuits, fine particle contamination accelerates wear. This filter’s 12 µm microfibers media removes silt and debris, keeping valve spools and pump clearances protected and maintaining consistent system response.
Mobile Equipment in Dusty Environments
Construction, mining, and agricultural machinery operate in gritty conditions that challenge hydraulic filtration. This element provides dependable dirt-holding capacity, helping extend service intervals and preventing unscheduled downtime in the field.
Preventive Maintenance Scheduling
Swapping out hydraulic filters on a fixed schedule is critical to avoid catastrophic failures. This direct replacement filter allows workshops to keep a cost-effective stock on hand, ready for routine service on multiple machine brands.
Workshop Inventory Consolidation
With cross-compatibility covering Bosch, Mahle, Pall, Rexroth, and many others, this filter reduces the need to stock numerous OEM parts. A single SPM part number simplifies ordering and shelf management while covering a broad fleet.
This filter is designed to match the critical dimensions of Hydac filter elements that share the 32.2 mm inner diameter, 58 mm outer diameter, and 161 mm total height. Always compare these measurements against your current element and housing before ordering to confirm physical fit.
This filter uses inorganic microfibers to achieve a 12 µm absolute filtration rating. This media effectively removes fine particles, such as wear debris and ingressed dirt, that can damage close-tolerance hydraulic components.
The element relies on its outer diameter and inner bore to locate within the housing, without a threaded spigot. The smallest inner diameter is 32.2 mm, designed to slide over a centre post, while the 58 mm outer diameter and 161 mm height match the cavity of compatible filter heads.
No, this is an aftermarket replacement filter built to the original dimensions and ratings. It is not a genuine part, but it is constructed with equivalent media and collapse pressure ratings to deliver reliable hydraulic protection at a lower cost.
First, relieve all hydraulic pressure and isolate the circuit. Remove the filter housing cover, take out the old element, and clean the housing bowl. Insert this filter, ensuring it seats correctly on the post, then replace the cover and torque to the manufacturer’s specification.
We provide a 30-day money-back guarantee and a price-beat guarantee on this filter. All orders ship worldwide with full tracking, so you can monitor your delivery every step up to your workshop door.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
