No Products in the Cart
| Filtration Media | Inorganic Microfibers 5 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 5 µm |
| Flow direction | In-Out |
| Total Height | 465 mm (18 5/16") |
| Largest Inner Diameter | 72 mm (2 27/32") |
| Smallest Inner Diameter | 10.3 mm (13/32") |
| Largest Outer Diameter | 106 mm (4 3/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Donaldson | P174570 |
| Fai Filtri | R-250-4-A03-A |
| Fairey Arlon | TXW5A2B |
| Fairey Arlon | TXW5A3 |
| Fairey Arlon | TXW5A3B |
| Fairey Arlon | TXW5ACC3 |
| Fairey Arlon | TXW5AGDL03 |
| Geesink | 902275 |
| Mahle | TXW5ARN2003 |
| Oxfil | HF.9360 |
| Parker Parfit | 937745Q |
| Sofima (UFI) | ERF24NFA |
| Spare Part Mart | SPM-HYD-1841 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Heavy-Duty Construction Environments
Geesink waste-handling and construction vehicles often operate in dusty, grit-laden conditions. This filter’s 5 µm inorganic microfibers media captures abrasive contaminants that can score pistons and clog valves. The result is a longer service life for hydraulic pumps and a reduction in unplanned downtime.
Continuous-Duty Fleet Operations
For refuse collection fleets running multiple daily shifts, hydraulic oil must stay clean under constant pressure and heat. This filter maintains a high contaminant-holding capacity, helping to preserve oil condition and extend drain intervals. This translates into lower operational costs and fewer filter changes.
Streamlined Inventory Management
With cross-references to eight major filter brands, this single element replaces multiple OEM part numbers in your stores. It simplifies stock keeping and reduces the chance of ordering delays, while ensuring every Geesink machine in the fleet receives consistent filtration quality.
Precision Hydraulic Circuit Protection
Modern Geesink hydraulics use tight-tolerance valves and servo controls that are sensitive to even microscopic dirt. The 5 µm rating ensures oil cleanliness at a level that safeguards these precision components, preventing erratic movement and costly repairs.
This filter is a direct replacement for the hydraulic filter fitted to a wide range of Geesink equipment. It cross-references with OEM part numbers from Donaldson, Mahle, Parker, and other recognised brands. Always verify your machine’s required part number against our cross-reference list, but if your Geesink unit calls for any of these references, this element will install without modification.
The element employs inorganic microfibers media with a 5 µm absolute rating. This synthetic material provides high dirt-holding capacity and consistent particle removal efficiency, keeping hydraulic oil clean enough to protect pumps, valves, and actuators from abrasive wear.
This filter has a total height of 465 mm, a largest outer diameter of 106 mm, and two inner diameters: 72 mm at the large end and 10.3 mm at the small end. It is designed for in-to-out flow. Because it mirrors the OEM part exactly, it fits the filter housing without leaks or bypass issues. Always check your housing seal and mounting surface before installation.
No, this filter is an aftermarket filter built to match the original equipment specifications. It is not an OEM or genuine part. However, it is manufactured to deliver the same filtration performance and dimensional accuracy. It comes with a 30-day money-back guarantee and our price-beat promise, giving you confidence in its quality and value.
Installation follows the manufacturer’s procedure for your machine. First, depressurise the hydraulic system and allow the oil to cool. Remove the old filter, clean the housing, and lubricate the new element’s sealing surfaces with clean hydraulic fluid. Tighten to the recommended torque, then start the system and check for leaks while cycling the hydraulics.
We ship worldwide with tracking on every order. Every this filter filter is covered by a 30-day money-back guarantee and our price-beat guarantee. If you find an identical aftermarket filter at a lower price elsewhere, we will beat that price. The actual delivery timeline will be provided at checkout based on your location.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
