Mahle PI36006DNDRG40, direct aftermarket replacement. Aftermarket replacement element for the Mahle PI36006DNDRG40: a 40 µm stainless wire mesh element with nitrile seals for Mahle filters that take the PI36006DNDRG40. It measures 44.4 mm outside diameter, 22.2 mm bore and 157.5 mm long, with flow from outside to inside.
Wire mesh elements are used for coarse protection on suction, return and transfer lines and can be cleaned and refitted. Sold as a single element, shipped worldwide, and covered by our
30 day money back guarantee and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Hydraulic filter element |
| Replaces |
Mahle PI36006DNDRG40 |
| Filtration Media |
Stainless steel wire mesh |
| Filtration Rating |
40 µm wire mesh |
| Flow Direction |
Out-In |
| Seal Material |
Nitrile (NBR / Buna-N) |
| Largest Outer Diameter |
44.4 mm (1 3/4") |
| Largest Inner Diameter |
22.2 mm (7/8") |
| Total Height |
157.5 mm (6 3/16") |
| Construction |
corrosion resistant steel end caps, single open end |
| Collapse Rating |
450 psid |
| Stat. HS-Code |
842129 |
| Country of Manufacture |
China |
Compatible equipment
Mahle
Filters taking the PI36006DNDRG40 element
Measure the old element
OD 44.4 mmBore 22.2 mmLength 157.5 mm
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| Cardinal Filters |
USD 91.35 |
25 Oct 2026 |
| FilterFinder Online |
USD 109.00 |
25 Oct 2026 |
| Hydrafil |
USD 127.39 |
25 Oct 2026 |
| Spare Part Mart |
USD 73.08 |
Today |
Our price of USD 73.08 is 20% to 43% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Industrial power units
Return and pressure filters on presses, machine tools, plastics machines and test rigs take this element. A fresh element keeps pumps and valves at the cleanliness they were designed for.
Mobile and marine hydraulics
The same element sizes run on cranes, winches, deck machinery and mobile plant, where contamination is the main cause of pump and valve wear.
Lube oil circuits
Gearbox and bearing lubrication systems use the same elements to keep particles out of the oil that feeds the bearings.
Planned maintenance stock
Sites with several filters on the same element can hold stock for scheduled changes at a lower price than buying OEM every time.
Frequently asked questions
Is this a genuine Mahle PI36006DNDRG40?
No. It is an aftermarket element made to the dimensions and filtration grade of the Mahle PI36006DNDRG40. It is not made by or affiliated with MAHLE, and the part number is used only to show what it replaces.
Will it fit my filter?
Yes if your filter takes the Mahle PI36006DNDRG40. Check the old element: 44.4 mm outside diameter, 22.2 mm bore and 157.5 mm overall length.
Which seals does it have?
Nitrile (NBR) seals, which suit mineral oil based hydraulic, lube and turbine oils. Ask us before ordering if your system runs a fire resistant or synthetic ester fluid.
When should I change the element?
Change it when the filter's clogging indicator shows the element is loaded, or at the interval in your maintenance plan, whichever comes first.