No Products in the Cart
| Element Collapse pressure | 20 bar (290 PSI) |
| Filtration Media | Wire Mesh 50 µm |
| Media type | Wire Mesh |
| Filtration Rating | 50 µm |
| Flow direction | Out-In |
| Total Height | 84 mm (3 5/16") |
| Largest Inner Diameter | 22.1 mm (7/8") |
| Largest Outer Diameter | 47 mm (1 27/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | D-0060-S50-NHA |
| Fleetguard | ST1890 |
| Hydac | 00060D050W |
| Hydac | 00060D050WHC |
| Hydac | 1250488 |
| Oxfil | HF.8635 |
| Spare Part Mart | SPM-HYD-1664 |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Cardinal Filters | USD 34.62 | 12 Oct 2026 |
| Filtration Point | USD 42.06 | 12 Oct 2026 |
| Hydrafil | USD 74.95 | 12 Oct 2026 |
| FilterFinder Online | USD 82.00 | 12 Oct 2026 |
| Spare Part Mart | USD 27.70 | Today |
Our price of USD 27.70 is 20% to 66% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-Contamination Environments
In dusty or dirty operating conditions, the 50-micron wire mesh media captures larger particles effectively, reducing wear on hydraulic components. Consistent filtration helps extend service intervals even when fluid cleanliness is challenged.
Continuous-Duty Systems
For machinery running around the clock, the 20 bar collapse pressure ensures the element maintains structural integrity under sustained pressure. This reliability minimises unplanned downtime and keeps production on track.
Scheduled Maintenance Cycles
A known micron rating allows maintenance teams to predict filter change-outs based on actual contamination loads. Replacing filters on time prevents bypassing and keeps hydraulic fluid within cleanliness targets.
Inventory Consolidation
Because this filter cross-references to multiple brands, it can replace several different part numbers in your stores. This simplifies procurement, reduces shelf space, and lowers the risk of ordering incorrect filters.
This filter is a direct replacement for Hydac elements. Confirm your existing filter measures 84 mm total height, 47 mm largest outer diameter and 22.1 mm largest inner diameter. Matching these dimensions ensures proper fit.
It uses wire mesh media with a 50-micron filtration rating. The mesh captures solid particles while allowing full hydraulic flow, suited for general contamination control in compatible systems.
The filter operates with an out-in flow direction. Oil enters from the outside and exits through the centre. Installing it the wrong way around can cause damage, so verify your system design before fitting.
No, this filter is an aftermarket replacement built to the original dimensions and ratings. It provides reliable performance at a lower cost and is not manufactured by Hydac or other original brands.
Remove the old element, clean the housing, and insert this filter with the correct flow direction. Always replace seals if supplied and follow equipment manuals for specific torque settings.
We ship worldwide with tracking. Every order comes with a 30-day money-back guarantee and our price-beat guarantee, letting you buy with confidence.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
By entering your email you agree to our terms and conditions.
WELCOME10
Tap below and it is applied to your basket automatically, so you will not need to type it at checkout. Check your email and confirm the address and we will tell you when that part is due again.
Apply it and keep shopping
